Standard DTF
- Inks
- CMYK and white
- Color
- Full color for logos, text, photos and illustrations.
- Good for
- Everyday orders and long runs at a lower price per foot.
- 1 ft
- $4.00
- 5 ft
- $15.00
- 10 ft
- $28.00
DTF
Place your designs on a 22.3″ wide sheet, arrange them in the browser, and order the length you need.
Standard DTF · 1 ft
Shipping: $19.90 UPS Express. Free on US orders $99+.
Not sure which film fits your work? Order a 1 ft sheet in each and press them side by side.
Spec sheet
PNG at 300 DPI with a transparent background, or vector AI, PDF or EPS. Vector files (AI, PDF, EPS) are preferred.
Hot peel: lift the film while the transfer is still warm.
Tested for 100+ washes.
Free UPS Express on US orders $99+. Under $99, UPS Express to US addresses is $19.90.
Ships within 24 hours, Monday–Friday. 1–3 day US delivery.
Production and shipping are separate. The delivery window starts once your package is with the carrier.
If we got it wrong, we reprint it. Email info@wolfdtf.com within 7 days of delivery with your order number and clear photos. Transfers are printed to order, so they can't be returned once production starts.
Two films
Both films print on the same 22.3″ gang sheets and press the same way. The difference is the ink set and the price.
Same sheets: 22.3″ wide, 1 to 40 ft. Same press: 290–320°F, 8–15 seconds, medium pressure, hot peel.
Not sure which film fits your work? Order a 1 ft sheet in each and press them side by side.
Sheet lengths & prices
Prices read live from the product. Rolls: 165 ft and 330 ft.
Free UPS Express on US orders $99+. Under $99, UPS Express to US addresses is $19.90.
How it works
Standard or HyperColor film. A 22.3″ sheet from 1 ft to 40 ft, or single transfers by size.
Arrange your designs in the builder, or upload a print-ready file: PNG at 300 DPI with a transparent background, or vector AI, PDF or EPS.
290–320°F · 8–15 seconds · medium pressure. Peel the film hot in one smooth motion, then re-press 5–10 seconds with a cover sheet.
Press guide
General DTF settings for Standard and HyperColor film. The fabric table below adjusts them.
143–160°C
Immediately, while warm
HyperColor DTF presses with the same settings.
| Fabric | Temperature | Time | Note |
|---|---|---|---|
| 100% cotton | 310–320°F | 12–15 s | Hotter, longer end of the range. |
| Polyester | 285–300°F | 10–12 s | Lower heat, no scorching. |
| Cotton/poly blend | 300–310°F | 10–12 s | |
| Fleece & hoodies | 300–310°F | 12–15 s | Pre-press to flatten the nap. |
| Nylon & coated jackets | 290°F | 8 s | Use a protective sheet. Test first. |
Care: wash inside out in cold water, no bleach, hang dry or tumble low. A heat press is strongly recommended; a home iron can't hold even pressure.
Presses vary — run a small test first.
Full pressing guideBefore you order
The short answers. The full list is on the FAQ page.
No minimums. No setup fees. Order a single 1 ft sheet.
Use the Gang Sheet Builder to lay out several designs on one 22.3″ sheet in your browser, from 1 ft to 40 ft. Use Upload when your sheet is already laid out and print-ready. Use DTF by Size to set a width and height for each design and order single transfers, priced by the exact size you set.
PNG at 300 DPI with a transparent background, or vector AI, PDF or EPS. Vector files (AI, PDF, EPS) are preferred.
Standard prints with CMYK and white ink. HyperColor adds red, green, blue and orange inks. Standard DTF costs less at every length. You choose the film on the product page before you open the Gang Sheet Builder. Not sure which film fits your work? Order a 1 ft sheet in each and press them side by side. HyperColor rolls are on the upload page.
Ships within 24 hours, Monday–Friday. 1–3 day US delivery. Production and shipping are separate. The delivery window starts once your package is with the carrier. The countdown on this page shows the time left to the next production cutoff; weekdays and Saturday morning have a cutoff, Sunday has none. Very large runs can take longer; email the date first.
Free UPS Express on US orders $99+. Under $99, UPS Express to US addresses is $19.90. Rates for other destinations are calculated at checkout.
290–320°F (143–160°C), 8–15 seconds, medium pressure (35–45 psi), hot peel. Pre-press the garment for 3–5 seconds, peel the film immediately while warm in one smooth motion, then re-press for 5–10 seconds with a cover sheet. HyperColor DTF presses with the same settings. Presses vary — run a small test first.
Peel hot. Lift the film immediately while the transfer is still warm, in one smooth motion. Then re-press for 5–10 seconds with a cover sheet for wash durability.
If we got it wrong, we reprint it. Report within 7 days of delivery. Email info@wolfdtf.com with your order number and clear photos. After we review it, we offer a reprint, store credit or another fix.
Transfers are printed to order, so they can't be returned once production starts. Need to cancel? Email us right away. We can only cancel orders that haven't been printed yet.