Skip to product information
Printed Directly by Wolf DTF.
Universal Fabric Compatibility
Rich Color, Micro-detail
50+ Wash Durability
Hassle-Free Replacement Guarantee
Buy More & Save More | Order by 2:00 PM — Ships within 24 hours. No Minimums, Setup or Art Fees
Upload your images
↓
Application & Care Guide
Use these professional settings for the best results. Always run a small test first, as presses may vary.
General Application Settings
- Temperature: 290–320°F
- Time: 8–15 sec
- Pressure: Medium (35–45 psi / 3–4 bar)
- Peel: Hot peel – remove film immediately while warm
Fabric-Specific Recommendations
| Fabric | Temp (°F) | Time (sec) | Notes |
|---|---|---|---|
| Cotton | 310–320 | 12–15 | Durable, best wash resistance |
| Polyester | 285–300 | 8–10 | Lower heat to avoid scorching |
| Cotton/Poly Blends | 300–310 | 10–12 | Helps reduce dye migration |
| Spandex / Lycra | 285–295 | 8–10 | Do not overstretch fabric |
| Denim | 320 | 15–20 | Use firm pressure |
| Fleece / Wool | 300 | 12–15 | Pre-press to flatten |
| Leather / PU | 275–285 | 6–8 | Test first, low heat only |
Fabric
Cotton
Temp
310–320 °F
Time
12–15 sec
Notes
Durable, best wash resistance
Fabric
Polyester
Temp
285–300 °F
Time
8–10 sec
Notes
Lower heat to avoid scorching
Fabric
Cotton/Poly Blends
Temp
300–310 °F
Time
10–12 sec
Notes
Helps reduce dye migration
Fabric
Spandex / Lycra
Temp
285–295 °F
Time
8–10 sec
Notes
Do not overstretch fabric
Fabric
Denim
Temp
320 °F
Time
15–20 sec
Notes
Use firm pressure
Fabric
Fleece / Wool
Temp
300 °F
Time
12–15 sec
Notes
Pre-press to flatten
Fabric
Leather / PU
Temp
275–285 °F
Time
6–8 sec
Notes
Test first, low heat only
Product-Based Guidelines
- T-Shirts & Hoodies: 310°F / 12 sec
- Caps: 290°F / 12 sec
- Tote Bags: 310°F / 10 sec, firm pressure
- Jackets (Poly/Nylon): 290°F / 8 sec, protective sheet
- Sports Jerseys: 285–300°F / 8–10 sec, plus 2–3 sec finish press
Extra Tips
- Pre-press garment 2–3 sec to remove wrinkles & moisture
- Always use parchment or Teflon sheet
DTF Transfer Care Instructions
- Wash inside out at 30 °C (86 °F)
- Do not bleach, tumble dry, or iron directly on the design
- Wait 24 h before first wash
✅ Keep your press clean and flat for consistent pressure across the whole transfer.